Aluminium Parallel Groove Connector JBL-B
The PG clamp is a non-tension connector, it used for parallel contact of Aluminium strand conductor, steel reinforced Aluminium conductor or jumper conductor of non-linear pole.
The applicable range from 16mm2 to 240mm2
Producing capacity: 450000pcs/month
Description
Baoding Sihedan Electric Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of aluminium parallel groove connector jbl-b in China. With abundant experience, we warmly welcome you to buy cheap aluminium parallel groove connector jbl-b from our factory. Quality products and low price are available.
Aluminium to Aluminium PG Clamp
DESCRIPTION
The PG clamp is a non-tension connector, it used for parallel contact of Aluminium strand conductor, steel reinforced Aluminium conductor or jumper conductor of non-linear pole.
The aluminium PG clamp have a slip strength of 10% of calculative tensile strength of applied conductor and
The DKLINE Aluminium to Aluminium PG clamp will not reduce the electric capacity of the conductor.
The DKLINE Aluminium to Aluminium PG clamp not greater than 1.1 times of the equivalent length of the reference conductor.
The temperature rise of the surface of joint no higher than the reference conductor.
DKLINE BOLTED TYPE ALUMINIUM PG CLAMP
FEATURES
■ Fast and easy installation;
■ Pre-fill oxide-inhibiting compound intended to reduce metal oxidation;
■ Hot dip and stainless steel fasteners for choose;
■ wide range of conductor application.
DKLINE AL NON-TENSION CONNECTOR
TECHNICAL PARAMETERS
|
Material and Construction |
|
|
Upper Jaw |
Aluminium Alloy |
|
Lower Jaw |
Aluminium Alloy |
|
Fasteners |
Hot dip galvanized or stainless steel |
|
Mechanical Strength |
|
|
Failure load |
10% of the reference conductor |
|
Standard |
|
|
Design |
IEC 61284, DIN 48072 |
|
Testing |
IEC 61284 |
|
Producing Capacity |
|
|
Producing Capacity |
450000pcs/month |
DKLINE AL BOLTED NON-TENSION CONNECTOR
DATAS
|
Part No. |
JBL-1BB |
JBL-2BB |
JBL-3BB |
|
Application (mm2) |
16-70 |
35-120 |
50-240 |
|
No. of bolt |
2 |
2 |
2 |
DKLINE PG CLAMP WIHTOUT NUT
DIMENSION



|
Part No. |
JBL-1BB |
JBL-2BB |
JBL-3BB |
|
|
Fig. |
1 |
1 |
1 |
|
|
Dim. (mm) |
L |
42 |
45 |
45 |
|
W |
32 |
47 |
63 |
|
|
No. Of bolts |
2 |
2 |
2 |
|
|
Bolt size |
M8x45 |
M10x55 |
M10x70 |
|
DKLINE BOLTED TYPE PARALLEL GROOVE CLAMP
FAQ:
1.What is the MOQ?
There are no MOQ limit in first order, and 100pcs in further.
2.Samples providing?
We are providing the samples by free, but need pay for the freight charge.
3.EPC material design and provide in lot?
Yes, we are supplying for LV and MV EPC material in lot many years.and have strong design team.
4.OEM available?
Yes, we are providing the anchor clamp as custom requirement.
5.Complete documents for tender?
Yes, whole set documents ready for submit.
DKLINE BOLT TYPE PARALLEL GROOVE CONNECTOR
ADVANTAGE:
1.Full set quality control plan to confirm the quality;
2.ISO 9001, ISO 14001 and ISO 18001 factor;
3.Low cost low price.
4.Quick response, fast quotation.
5.Dependably after-sale service.
6.Full set documents to submit the tender.
Hot Tags: aluminium parallel groove connector jbl-b, China aluminium parallel groove connector jbl-b manufacturers, suppliers, factory
Send Inquiry
You Might Also Like








