Parallel Groove Clamp CAPG

Aluminium to Copper PG Clamp

DESCRIPTION

The PG clamp is a non-tension connector, it used for parallel contact of Aluminium strand conductor, steel reinforced Aluminium conductor or jumper conductor of non-linear pole.

The Aluminum parallel groove clamp is consist of a aluminium upper jaw, a aluminium low jaw, and grade 8.8 fasteners.

The aluminium PG clamp have a slip strength of 10% of calculative tensile strength of applied conductor and

The DKLINE Aluminium to Copper PG clamp will not reduce the electric capacity of the conductor.

The DKLINE Aluminium to Copper PG clamp not greater than 1.1 times of the equivalent length of the reference conductor.

The temperature rise of the surface of joint no higher than the reference conductor.

 

DKLINE BOLTED TYPE AL-Cu PG CLAMP

FEATURES

■ Fast and easy installation;

■ Provided with an oxide-inhibiting compound intended to reduce metal oxidation;

■ Hot-forged aluminium to confirm the volume density;

■ Hot dip and stainless steel fasteners for choose;

■ wide range of conductor application.

■ Welding Copper plate for tap groove

 

DKLINE AL-Cu NON-TENSION CONNECTOR

TECHNICAL PARAMETERS

Material and Construction
Upper Jaw	Aluminium Alloy
Lower Jaw	Aluminium Alloy and welded copper plate
Fasteners	Grade 8.8 Hot dip galvanized or stainless steel
Mechanical Strength
Failure load	10% of the reference conductor
Standard
Design	IEC 61284, DIN 48072
Testing	IEC 61284
Producing Capacity
Producing Capacity	400000pcs/month

 

DKLINE AL BOLTED NON-TENSION CONNECTOR

DATAS

Part No.	Conductor application		No. of bolts	Size of bolt
	Aluminium	Copper
CAPG-A1	16-70	6-50	1	M8x40
CAPG-A1	25-150	10-95	1	M8x45
CAPG-B1	16-70	6-50	2	M8x45
CAPG-B2	25-150	10-95	2	M8x50
CAPG-B3	25-240	25-200	2	M10x60
CAPG-B4	35-300	35-240	2	M10x70
CAPG-C1	16-70	6-50	3	M8x45
CAPG-C2	25-150	10-95	3	M8x50
CAPG-C3	25-240	25-200	3	M10x60
CAPG-C4	35-300	35-240	3	M10x70

 

DKLINE HOT FORGED PG CLAMP

DIMENSION

Part No.	Fig.	Dimensions		No. of bolt	Size of bolt
		W	L
CAPG-A1	1	41.5	25	1	M8x40
CAPG-A1	1	45	30.5	1	M8x45
CAPG-B2	2	41.5	40	2	M8x45
CAPG-B3	2	45	49.5	2	M8x50
CAPG-B4	2	58	63	2	M10x60
CAPG-C1	3	41	46	3	M8x45
CAPG-C2	3	45	69	3	M8x50
CAPG-C3	3	58	90	3	M10x60
CAPG-C4	3	64	104	3	M10x70

 

DKLINE BOLTED TYPE BIMETALLIC PARALLEL GROOVE CLAMP

FAQ:

1.What is the MOQ?

There are no MOQ limit in first order, and 100pcs in further.

2.Samples providing?

We are providing the samples by free, but need pay for the freight charge.

3.EPC material design and provide in lot?

Yes, we are supplying for LV and MV EPC material in lot many years.and have strong design team.

4.OEM available?

Yes, we are providing the anchor clamp as custom requirement.

5.Complete documents for tender?

Yes, whole set documents ready for submit.

 

DKLINE BOLT TYPE PARALLEL GROOVE CONNECTOR

ADVANTAGE:

1.Full set quality control plan to confirm the quality;

2.ISO 9001, ISO 14001 and ISO 18001 factor;

3.Low cost low price.

4.Quick response, fast quotation.

5.Dependably after-sale service.

6.Full set documents to submit the tender.

Hot Tags: parallel groove clamp capg, China parallel groove clamp capg manufacturers, suppliers, factory