Insulator Top Tie
Top Ties are intended to secure bare or jacketed distribution conductors in the top groove of vertically mounted insulators. They provide an improved method of securing conductors compared to clamp to pin sulators or handmade binds. Top Ties with pad are recommended for use with bare conductors. They provide superior abrasion protection for the conductor under all typesof motion, including Aeolian vibration, galloping and sway.
Description
Baoding Sihedan Electric Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of insulator top tie in China. With abundant experience, we warmly welcome you to buy cheap insulator top tie from our factory. Quality products and low price are available.
DKLINE Insulator top tie
DESCRIPTION
Metal top ties are intended for securing bare conductors into the top groove of insulators.
On vertically-mounted insulators, single line.top ties can normally accommodate line angels of up
to 10 depending on insulator orientation.
Mechanical: Single line ties/top ties will develop unbalanced and lift-off loads equivalent to , or in excess of, a hand tie over covered conductor. When installed with a pad on bare conductor, single line ties/top ties provide superior protection against abrasion and all types of conductor motion. The pad is a resilient cushion at the point of contact between conductor and insulator.
DKLINE Insulator top tie
FEATURES
■ High tensile strength
■ Corrosion resistant.
■ Good elasticity
■ Use under harsh conditions
DKLINE Insulator top tie
TECHNICAL PARAMETERS
|
Material and Construction |
|
|
Material |
Aluminum clad steel with an elastomer pad |
|
Use an insulator range
|
|
|
Φ57mm , Φ73mm and Φ89mm |
|
|
Applicable conductor |
|
|
ACSR, All-Aluminum, Aluminum Alloy and etc ... |
|
|
Color code |
|
|
Blue,brown,orange,red,yellow,purple |
|
DKLINE Insulator top tie
DIMENSION
DKLINE Insulator top tie
FAQ:
1.What is the MOQ?
There are no MOQ limit in first order, and 100pcs in further.
2.Samples providing?
We are providing the samples by free, but need pay for the freight charge.
3.EPC material design and provide in lot?
Yes, we are supplying for LV and MV EPC material in lot many years.and have strong design team.
4.OEM available?
Yes, we are providing the anchor clamp as custom requirement.
5.Complete documents for tender?
Yes, whole set documents ready for submit.
DKLINE Insulator top tie
ADVANTAGE:
1.Full set quality control plan to confirm the quality;
2.ISO 9001, ISO 14001 and ISO 18001 factor;
3.Quick response, fast quotation.
4.Dependably after-sale service.
5.Full set documents to submit the tender.
Hot Tags: insulator top tie, China insulator top tie manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
