What Is A Torque Terminal?

A torque terminal is used to butt or end a cable by using a torque construction nail, including a torque terminal and a torque splicing tube. The following uses the torque connector as an example to introduce some advantages of the torque connector.

1. Do not need crimping tools, just an ordinary socket wrench, the torque bolt can be broken, the benefits are quick, simple, reduce installation costs, joint quality is stable, not affected by human factors.

2. Suitable for copper and aluminum, it can be used for copper conductors, aluminum conductors and aluminum alloy conductors of 35Kv and below voltage level, including copper and aluminum transition butt. The benefit is that the inventory is greatly reduced, and there is no need to buy multiple models to take over, which is convenient for management. For example, the torque nozzle 150/240, the original need for copper nozzle three kinds, aluminum nozzle three kinds, copper and aluminum transition nozzle three kinds, now only one.

3. Wide range, due to the difference in cable diameter produced by each cable factory, the inner diameter of each takeover plant is inconsistent, each installation worker's electrical water is not the same, the traditional crimped takeover installation quality is very different, according to the customer's internal statistics, the joint that meets the standard requirements will not exceed 5%. Due to the wide range characteristics of the torque nozzle, these problems are solved. Using customer words to describe is to use technical means to solve practical problems.

4. More reliable electrical performance. After the traditional nozzle crimping will produce diamond edge, burr, and even flash, need to be carefully polished, high requirements for construction personnel.

5. Special applications, such as thin twisted flexible cable, because the flexible cable is thicker than the ordinary copper cable with the same screenshot, the ordinary terminal can not be plugged in, and the big one connection tube is not tight, and the torque connection tube is very easy to solve.