Connection Of Ceramic Insulators With Channel Angle Iron

The connection between ceramic insulators and channel steel Angle iron is generally connected by bolts. The specific steps are as follows:

1. Drill holes corresponding to ceramic insulators in the channel Angle iron in advance;

2. Ensure that the hole position is correct, and place the ceramic insulator on the channel Angle iron;

3. Pass the bolt through the hole and fix it with a nut, be careful not to tighten it too much;

4. Check the fastening to ensure that the connection is firm and stable.

It should be noted that excessive force should be avoided when connecting, otherwise it may cause damage to the ceramic insulator. In addition, the connection bolt material should also be selected to meet the requirements of high strength bolts.